Comparison of load during joining of FSW and SSW
Perform a joint at a depth of 4mm using tools and conditions of the same shape, and compare the loads in the vertical direction and the travel direction!
We will introduce a comparison of the joining load between FSW and SSW. It is possible to reduce the vertical load applied during joining by more than 50%, and the required pressing pressure can be reduced to about half. Additionally, the joining load on the drive shaft side is approximately 3KN for FSW, while it is less than 1KN for SSW, resulting in a reduction to less than one-third compared to FSW. [Overview] ■ It is possible to reduce the vertical load applied during joining by more than 50% ■ The required pressing pressure can be reduced to about half ■ The joining load on the drive shaft side can be reduced to less than one-third *For more details, please refer to the PDF document or feel free to contact us.
- Company：京浜ラムテック
- Price：Other
